home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Hacker Chronicles - A…the Computer Underground
/
The Hacker Chronicles - A Tour of the Computer Underground (P-80 Systems).iso
/
pyro
/
napalm2.txt
< prev
next >
Wrap
Text File
|
1992-03-03
|
3KB
|
106 lines
:>:>:>:>:>:>:>:>:>:>:<:<:<:<:<:<:<:<:<:
:> <:
:> -\ Explosives and Bombs /- <:
:> <:
:> Uploaded By: <:
:> //// //// <:
:> / / / / <:
:> / / ptimus //// rime <:
:> //// // <:
:> <:
:>:>:>:>:>:>:>:>:>:>:<:<:<:<:<:<:<:<:<:
-\ Firebombs /-
Most fire bombs are simply gasoline
filled bottles with a fuel soaked rag
in the mouth (the bottle's mouth, not
yours). The original Molotov cocktail,
and still about the best, was a mixture
of one part gasoline and one part motor
oil. The oil helps it to cling to what
it splatters on.
Some use one part roofing tar and
one part gasoline. Fire bombs have been
found whcih were made by pouring melted
wax into gasoline.
=======================================
-\ Napalm /-
About the best fire bomb is napalm.
It has a thick consistancy, like jam
and is best for use on vehicles or
buildings.
Napalm is simply one part gasoline
and one part soap. The soap is either
soap flakes or shredded bar soap.
Detergents won't do.
The gasoline must be heated in
order for the soap to melt. The usual
way is with a double boiler where the
top part has at least a two-quart
capicity. The water in the bottom part
is brought to a boil and the double
boiler is taken from the stove and
carried to where there is no flame.
Then one part, by volume, of
gasoline is put in the top part and
allowed to heat as much as it will
and the soap is added and the mess is
stirred until it thickens. A better
way to heat gasoline is to fill a
bathtub with water as hot as you can
get it. It will hold its heat longer
and permit a much larger container
than will the double boiler.
=======================================
-\ Match Head Bomb /-
Simple safety match heads in a pipe,
capped at both ends, make a devestating
bomb. It is set off with a regular fuse
A plastic Baggie is put into the
pipe before the heads go in to prevent
detonation by contact with the metal.
Cutting enough match heads to fill
the pipe can be tedious work for one.
=======================================
-\ Fuse Ignition Fire Bomb /-
A four strand homemade fuse is used
for this. It burns like fury. It is
held down and concealed by a strip of
bent tin cut from a can. The exposed
end of the fuse is dipped into the
flare igniter. To use this one, you
light the fuse and hold the fire
bomb until the fuse has burned out
of sight under the tin. Then throw it
and when it breaks, the burning fuse
will ignite the contents.
-\ Disclaimer /-
------------------------------------
I am not responsible for any death
or injury caused by using what is
contained herin.
-Optimus Prime-
------------------------------------
/\DONE
DOWNLOADED FROM P-80 SYSTEMS......